Material
PLATE – Gunmetal / Brass
U BOLT – Copper / Copper Alloy / Stainless Steel
U Bolt – Rod Clamp
| Nominal Rod Dia. | Hole Centres mm |
| 5/8” | 37 |
| 3/4” | 37 |
| 1” | 37 |
| 1.1/4” | 43 |
| 1.1/2” | 54 |
| 2” | 64 |
U Bolt – Rod To Tape Clamp
| Nominal Rod Dia. | Tape Size mm |
| 5/8” / 16 | 25 |
| 3/4″ / 20 | 50 |
| 1” / 25 | 50 |
U Bolt – Rod To Cable Clamp – ‘GUV’
These are used for Connecting Rod to Cable. Available with different Rod & Cable size.
| Nominal Rod Dia. | Conductor Range – mm2 |
| 5/8” / 16 | 16 – 95 |
| 3/4″ / 20 | 16 – 70 |
| 5/8” / 16 | 70 – 185 |
| 5/8” / 20 | 70 – 150 |
U Bolt – Rod To Cable Clamp – ‘SCE’
These are used for Connecting Rod to Cable. Available with different Rod & Cable size.
| Nominal Rod Dia. | Conductor Range – mm2 |
| 9.5 | 6-35 |
| 14 | 16 – 95 |
| 5/8”/16mm | 16 – 95 |
| 3/4”/20mm | 70 – 300 |
| 1”/25mm | 70 – 185 |
U Bolt For Rigid Pipe & Cables – ‘PUB’
These U Bolts are used for universal parallel or 90 degree cable connection to rod or pipe.
Nominal Rod Dia: 3/8”, 1/2”, 3/4”, 1 – 1/2”, 2”
Cross Clamp
Cross Clamp for Earth Tape / Earth Round Bar / Earth Round Bar & Tape
Type – HOT DIP GALVANISED STEEL
HDG Steel Cross Clamp equipped with 4 Galvanised Screws & Nuts M8 x 25, suitable to connect –
- A) 8 mm or 10 mm Round Bars
- B) Galvanised Plates with maximum width of 30 mm.
- Type – Copper
- Copper Cross Clamp equipped with4 Stainless Steel Screws & Nuts M8 x 25, suitable to connect :-
- A) 8 mm or 10 mm Copper Round Bars
- B) Copper Plates with Maximum width of 30 mm.
Cross Clamp also available to connect Galv. Plate with 40 mm width.
Cross Clamp also available in size 60 x 60 x 3 / 60 x 60 x 4.
Cross Clamp also available of Stainless Steel on special request.
| Sizes | Intermediate Plate | Material |
| 60 x 60 x 2.5 | with | Hot Galv. Steel |
| 60 x 60 x 2.5 | without | Hot Galv. Steel |
| 60 x 60 x 2.5 | with | Copper |
| 60 x 60 x 2.5 | without | Copper |
